Same Room, Three Options
hardwood, tile, and LVP shown side by side
Refreshes & finishes
One room, three flooring directions, each with its own Materials and Installation notes.
The starting point
Flooring samples never look like the actual floor once it's installed under your furniture and your light — and it's one of the most expensive mistakes to walk back.
A sample chip that looks nothing like the floor once it covers 400 square feet
Hardwood that looks warm in the showroom and orange under your actual lighting
Not knowing if tile will feel too cold or too formal for the room
LVP that looks convincing in photos and cheap in person
A flooring choice made without seeing it next to the trim and walls you're keeping
A closer look / Before & after
BRILLER
Choose a floor for household use and adjoining levels, then compare real samples before committing to a full-room order.
Get an installed quote including preparation, trims, waste and disposal before comparing material prices.

Standard · Suggested specification14–15 mm engineered-oak plank with an approximately 3 mm real-timber wear layer and matt factory finish.
How to implement it
Check knot and colour grading on a multi-board sample; confirm compatibility with any underfloor heating.
What changes: Real timber varies naturally; the grade defines the intended range.
Check before ordering
Request a real plank edge sample and installation sheet; the same oak appearance can represent laminate, LVT or engineered timber.
Standard · Suggested specificationNew approximately 80 mm painted skirting and a matching movement profile at the glazed door.
How to implement it
Measure the door track and flooring build-up together; keep drainage and ventilation slots clear.
What changes: One planned junction is cleaner than improvised filler strips.
Check before ordering
Use the flooring maker’s perimeter gap and maximum-run limits; do not fill a floating-floor expansion joint with rigid grout.
Standard · Suggested specificationA tested floor-and-acoustic-underlay combination with declared impact-sound data and door-height allowance.
How to implement it
Request the complete test report and match the reference structure; avoid rigid perimeter bridges.
What changes: A system report supports comparison more than thickness alone.
Check before ordering
Do not transfer a laboratory underlay dB claim to this room without its test floor, installation and measured parameter.
Illustrative specifications. Confirm dimensions, loads, compatibility and local requirements with your project team. Use the current technical data and installation instructions for your selected products.
BRILLER
hardwood, tile, and LVP shown side by side
what each option actually requires underneath
not a showroom sample, your actual room's light
a premium option next to a budget-conscious one
Your workflow
the space as it is today
name the materials you're comparing
multiple directions generated for comparison
narrow down or adjust any option
ready to compare against samples
Illustrative advice for this use case
An example of the kind of guidance you can explore. Briller’s AI-assisted knowledge base brings together Mike’s experience and the practical know-how of architects, designers and builders. Check the details against your actual space.
5" wide-plank engineered white oak vs. matte porcelain plank tile vs. mid-grade LVP
Existing room lighting held constant across all three comparisons
Engineered hardwood floats or glues down depending on subfloor; tile needs a flat, rigid substrate and adds the most labor; LVP still needs a subfloor that meets the manufacturer’s flatness and moisture requirements.
A flooring render helps you explore colour and pattern — it can't tell you what's actually under your current floor. Get a subfloor check before committing to a material that assumes a flat, dry surface.
Copy an example, add your constraints and budget, then paste it into the Briller app.
Show this room in wide-plank hardwood, then in matte tile, same layout
Compare a premium hardwood against a budget LVP in this exact room
Match the flooring direction from my living room into this hallway
FAQ
A few practical answers before you start.
Yes — brief multiple directions and Refine to compare them.
No — that needs an in-person check before you commit to a material.
Yes, especially useful on Pro Design with multiple linked projects.
Start with Free for basic exploration. Explorer includes basic Smart Sparks; Pro Design and Studio / Architect include full Briller Insights. Compare the current plans for credits, exports and team features.
BRILLER
Bring your space, your budget and what matters most. Explore a direction before you commit.
Explore in Briller