Focal-Point-Only Direction
restyle the fireplace without touching the rest of the room
Refreshes & finishes
Upload the room, describe the fireplace direction, see it restyled without redesigning the whole room around it.
The starting point
A fireplace is usually the visual anchor of a living room, and it's also usually the one thing nobody's updated since the house was built, because redoing it feels disproportionate to redoing everything else.
A dated brick or tile surround that ages the whole room around it
A mantel that doesn't match anything else in the space anymore
Not knowing if a surround update means changing anything structural or gas-related
Assuming a fireplace update requires redesigning the entire room
A big swing (full stone wall) considered when a smaller update would work
A closer look / Before & after
BRILLER
Coordinate a new mantel and lighter surround finish while keeping the actual fireplace's installation requirements in control.
Confirm the proposed finish and mantel against the appliance instructions before purchasing or fitting.

Standard · Suggested specificationStone-look porcelain on a suitable non-combustible backing with a fireplace-approved adhesive and movement detail.
How to implement it
Agree edge returns, hearth junction and operating temperatures with the appliance installer before tile procurement.
What changes: A coordinated assembly matters more than tile appearance.
Check before ordering
Identify the appliance and obtain its installation manual first; decorative stone does not cancel combustible clearances or ventilation requirements.
Standard · Suggested specificationNew oak mantel on load-rated concealed brackets outside the appliance’s specified combustible-clearance envelope.
How to implement it
Locate sound structural support and approve a section showing shelf depth and clearances before fabrication.
What changes: Shelf depth and height must be checked together.
Check before ordering
There is no safe universal mantel height or depth: use the exact appliance manual and the local installer’s approval.
Standard · Suggested specificationPainted 18 mm MDF storage with supported shelves and a removable service back outside the verified heat envelope.
How to implement it
Set cabinet edges from the installer’s approved clearance drawing and keep AV cabling out of the enclosure.
What changes: A coordinated separation protects both finish and access.
Check before ordering
Check the appliance’s side clearances and convection route before adding cabinets, books or wiring beside the surround.
Illustrative specifications. Confirm dimensions, loads, compatibility and local requirements with your project team. Use the current technical data and installation instructions for your selected products.
BRILLER
restyle the fireplace without touching the rest of the room
tile, stone veneer, or paint, shown realistically
a modest refresh next to a full floor-to-ceiling redo
the fireplace shown in your actual space, not isolated
Your workflow
with the fireplace visible
paint, reface, or full re-clad
the fireplace restyled, room otherwise unchanged
compare a modest update against a full redo
ready to compare against contractor quotes
Illustrative advice for this use case
An example of the kind of guidance you can explore. Briller’s AI-assisted knowledge base brings together Mike’s experience and the practical know-how of architects, designers and builders. Check the details against your actual space.
Painted brick surround, walnut floating mantel shelf
Existing room lighting held constant to show true material tone
Even a surface-only treatment needs compatibility with the fireplace and its heat exposure. A heavier re-clad also needs a suitable support and fixing detail.
Surface finish, mantel and heavier cladding each need checking against the actual fireplace. Confirm heat suitability, combustible clearances, ventilation and support with a qualified installer before committing.
Copy an example, add your constraints and budget, then paste it into the Briller app.
Paint this brick surround white, add a simple wood mantel
Show a full stone veneer re-clad on this fireplace
Modest refresh versus a full redo, same fireplace
FAQ
A few practical answers before you start.
Yes — that's exactly what this is built for.
No — this is a surface and material direction only; anything involving gas lines or structure needs a licensed professional.
Yes — brief both and Refine to compare.
Start with Free for basic exploration. Explorer includes basic Smart Sparks; Pro Design and Studio / Architect include full Briller Insights. Compare the current plans for credits, exports and team features.
BRILLER
Bring your space, your budget and what matters most. Explore a direction before you commit.
Explore in Briller